Escout WIFI-Bluetooth 5.0 Gateway is a BLE to Wi-Fi connectivity gateway without the uses of smartphones or apps. The Escout Gateway collects the data from iBeacon, Eddystone, BLE sensor and other BLE devices, and then sends to the local server or remote cloud server by HTTP / MQTT / mbed (ARM) protocol over Wi-Fi / Ethernet / Cellular. This product is with a green color lamp ring on the top to indicate the status.
Features
General:
Supports input with DC 5.0V, 1A, micro-USB
Supports 10/100 Ethernet with 802.3af PoE
Supports firmware upgrade Over-the-Air
Supports HTTP/MQTT/mbed(ARM)
Operating temperature: -25℃ to 65℃
WIFI:
Wifi module based on the Mediatek's MT7688 580MHz 32-bit Application Processor
1T1R 2.4 GHz with 150 Mbps PHY data rate,802.11b/g/n WiFi
Two USB 2.0 Host Connectors and one TF Card slot
128 Mbyte 16-bit DDR2 RAM
16 Mbyte SPI NOR Flash
RGB LED strip as the status indicator
OpenWrt, Linux distribution for embedded devices.
BLE:
BLE module based on the Nordic's nRF52832 with ARM® Cortex®-M4 64MHz 32-bit processor
At least Bluetooth 4.0(Only Bluethooth Low Energy)
Typical Application
iBeacon / Eddystone / other BLE tag receiver
BLE sensor reader / receiver
Asset tracking
Access control management
Advertisement promotion
Indoor location and position
Industrial automation
Electronic Parameters
General Information
Color:White
Size:150x150x36mm
Net Weight:180g
Accessory:1x USB cable, mental fixing and screws
Absolute Maximum Rating
Power supply (Vcc):Max. 5.5 Volts, DC
Storage temperature:-40℃ to 85℃
Voltage ripple:+/- 2%
Operation Condition (Recommendable)
Operating temperature:-25℃ to 65℃
Humidity:Max 95%, Non condensing, relative humidity
Power supply (Vcc):DC 5.0 (+/- 5%)